The shaft’s angle of two gears crossing to right angle and providing the accurate transferred revolution.
There are straight and spiral gears in our variation. Material of S45C (ISO C45) with or without induction hardening.
The gear ratio are 1:1, 1:2 and 1:3.
There are straight and spiral gears in our variation. Material of S45C (ISO C45) with or without induction hardening.
The gear ratio are 1:1, 1:2 and 1:3.
- MGH-series can install to the gear’s shaft without an additional work after purchased.
- Bevel gear with induction hardening, keyway and thread hole.
Sizes: Module 0.5 to M7.0
Miter and Bevel gears of miniature module.
Materials: Poly-Acetal (Injection molded gears, Machined gears). Brass (C3604B=ISO CuZn39Pb3). Stainless steel of SUS304 (JIS G 4303)
Spiral miter and bevel gears
Materials: Carbon steel of S45C (ISO C45), Chromium Molybdenum steel of SCM435 (ISO 34CrMo4, 42CrMo4) (Fine cut spiral miter gears)
We have 2 types of gears with S45C (ISO C45). One is with induction hardening and the other is without.
Miter and Bevel gears of medium module.
Material: Carbon steel of S45C (ISO C45)
We have 2 types of gears with S45C (ISO C45). One is with induction hardening and the other is without.
Miter and Bevel gears of miniature module.
Materials: Poly-Acetal (Injection molded gears, Machined gears). Brass (C3604B=ISO CuZn39Pb3). Stainless steel of SUS304 (JIS G 4303)
Spiral miter and bevel gears
Materials: Carbon steel of S45C (ISO C45), Chromium Molybdenum steel of SCM435 (ISO 34CrMo4, 42CrMo4) (Fine cut spiral miter gears)
We have 2 types of gears with S45C (ISO C45). One is with induction hardening and the other is without.
Miter and Bevel gears of medium module.
Material: Carbon steel of S45C (ISO C45)
We have 2 types of gears with S45C (ISO C45). One is with induction hardening and the other is without.
